Step 1 - Check the contents

Remove all the parts from the box, lay them out, identify them and check the contents.

Step 2 - Choose a Pole location

Select the pole location, measure the ceiling height and place the base in postion.

Step 3 - Choose your extensions

Use the height chart to select any extensions (if required).

Step 4 - Locate the ceiling joists

Locate the ceiling joists by tapping with a finger or using a stud/joist locator. Adjust the base position to mid point between the joists.

Step 5 - Fit the extensions to the base (if required)

Attach any extensions to base insert. Extensions always fit at the bottom of the pole smallest first.

Step 6 - Attach lower main pole.

Screw the lower main pole onto the extension or base insert. Tighten firmly by hand.

Step 7 - Prepare Adjuster rod

Take off the adjuster cover tube and wind the adjuster locking nut to the top of the adjuster.

Step 8 - Fit adjuster

Screw the adjuster into upper main pole until the nut touches the top of the pole.

Step 9 - Fit adjuster cover

Slide adjuster cover into position just covering the O-ring.

Step 10 - Attach the Upper Dome

Slide the upper dome onto adjuster shaft. X-Pole uses a long adjuster shaft with 3 bearings to lock the dome at 90 degrees to the Pole.